Omnitec Design, Primary / Secondary Filters, 16" x 16" x 2"

OmniAire negative air machines are shipped with Dustlok primary/secondary poly-pad filters. Frequent changing of the inexpensive pre-filters will dramatically increase the useful life of more expensive hepa filter.

• Economical operation MERV-8 efficiency at low replacement cost
• Long life, dual density for progressive depth loading
• Antimicrobial treatment - effective control of mold, mildew, algae, fungi on-the filter
• Dustlok tactifier filters have fibers in the downstream layer coated with a special adhesive which holds dust particles
• Dual density media, high dust holding
• SPOR-AX antimicrobial is a biocide that effectively controls growth of mold, mildew, algae and fungi on filter
• Long service life
• The air enters the course, open structure of the white media which captures the large particle
• The orange, dense, downstream layer effectively stops and traps the finer particles
• SPOR-AX will not off gas, migrate or leach into the air stream
• The adhesive does not dry out or migrate

Standard/Approvals: UL Class 2 Rating

Application: For Use with Mfr. No. OA600N Negative Air Machine

A69382 OMNITEC OAP1616 16" X 16" X 2" PRIMARY / SECONDARY FILTERS, (20) PER CASE

• Product Type: Primary/Secondary Filter
• Size: 16 in x 16 in x 2 in
• For Use With: OmniAire 600 Nitro (600N) Portable HEPA Air Scrubber
• Width: 16 in
• Height: 2 in
• Depth: 16 in
• MERV: 8.0
• Standard Packaging: 20 per Box
• Weight: 0.230