Sporicidin, Mold Prevention, Mold Resistant Coating w/UV Indicator, Clear, 1 Gallon

SKU #:

110105

Catalog #: 1615-1007
Sporicidin® Mold Resistant Coating is an easy-to-use, water-based permanent coating that incorporates a unique zero VOC, EPA registered antimicrobial that prevents the growth of mold on the coating film. Developed for high moisture areas, this product forms a dehydration finish that does not allow moisture penetration, thus preventing the growth of mold on the film. The quality of the product, along with the anti-abrasion and anti-scratch qualities, exceed the performance requirements of the following microbiological resistant tests: ASTM D3273, D3274. Sporicidin Mold Resistant Coatings can be used on any new or existing building material before, during, or after installation. It quickly penetrates and adheres to porous and non-porous surfaces, providing a stain-blocking coating that will not blister, crack, or chip and restores the integrity of damaged materials. Coverage ranges from 35 sq. ft/can to 1,000 sq.ft/gallon depending on which product is used, substrate porosity and surface smoothness.

Features & Benefits:
  • Mold resistance on the film
  • Special UV detectable pigment for warranty verification (available on clear finish items only)
  • Non-leaching and non-toxic
  • Excellent longevity
  • Bonds to organic and inorganic surfaces
  • Superior moisture prevention
  • Breathable and paintable
  • Designed to provide a uniform primer or can be left as the top coat
  • Features phenomenal hiding and enamel holdout
  • Nanotechnology provides excellent durability and adhesion
  • Provides protection from water penetration
  • Seals water extractives and tannins in redwood and cedar.
  • Dry time: 30 min. to two hours depending on humidity and temperature (Item dependent see technical data sheets)
  • Shelf life: three years
  • Air Quality and Management District (AQMD) and VOC compliant

Dilution Ratios:RTU RTU pH: n/a Contains: 1 gallon

  • Product Type: Water-Based Flat Mold-Resistant Coating
  • Color: Clear
  • Form: Liquid
  • Odor/Scent: Alcoholic
  • Composition: 5 to 7% Octadecyl aminodimethyl trimethyl Ethoxysilylpropyl Ammonium Chloride, 1 to 1.5% Chloropropyl trimethoxy silane, 1 to 1.2% Methanol, >0.07 to <0.1 Dimethyl octadecyl amine
  • pH Value: 3.8
  • Specific Gravity: 0.99 at 20 deg C
  • Density: 8.25 lb/gal
  • VOC Content: <50 g/L
  • Coverage Area: 1000 sq-ft/gal
  • Standard Packaging: 4 per Case
  • Weight: 9.200

More Information
SKU 110105
Size 1 gl
Catalog # 1615-1007
Pack Size 1/gl
UOM gl
Manufacturer Part # MRC-80-1
Brand Sporicidin
Type Water Based
Color Clear
Form Liquid
pH 5.0-6.0
Fragrance Alcoholic
Finish Flat